Webcon UK Ltd

Anzac 51 · New user Joined: 28 May 2007 Posts: 1

Hi there

i have a Weber 32 DGR that i am looking at putting on a 1275 mini engine, i am having trouble getting it running correctly and i was wondering if any one knew what a idea of the jet sizes i need to get a good starting point for tuning

Anzac 51

MartinEva · Site Admin Joined: 03 May 2007 Posts: 9

We have never tried this carb on this engine so cannot give you a tried and tested setting, but try the following Main Jets for starters

Primary 155
Secondary 120

This has been used on another 1300cc engine and it works ok.

Regards.

Martin

bigjim5551212 · Posted: Tue Jun 12, 2007 5:17 am Post subject: weber on 1275

in my experience, i would start with a 50-55 idle jet primary, and 130-140 primary and seconday main jets. air correctors about 160 and 170. make sure your fuel pressure is not too high, no more than 3.5 psi
_________________
Jim Hilton
Overseas Distributing
Vancouver Canada
1-604-879-6288
www.overseas-auto.com
www.weberjets.com
jim@overseas-auto.com
Always on line MSN Messenger z5551212@hotmail.com