Webcon UK Ltd Forum Index Webcon UK Ltd
Weber Carburettors and Alpha Engine Management
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

1600 ohv Ford Crossflow

 
Post new topic   Reply to topic    Webcon UK Ltd Forum Index -> Calibration
View previous topic :: View next topic  
Author Message
Frenchenstein
New user


Joined: 26 Jul 2009
Posts: 2
Location: North Wales
PostPosted: Wed Jul 29, 2009 9:27 pm    Post subject: 1600 ohv Ford Crossflow Reply with quote
Hi there, I have a 1600 Ford Crossflow 711M engine fitted with a Kent 234 cam, and a Burton Stage Three cylinder head. I have a 32/36 DGV fitted and would like to know what airs, tubes and mains to fit, I'm happy with the idle, transition to main is good, I'm worried that at high revs (full power achieved at 7200rpm) I'm possibly over fuelling, and under fuelling will melt pistons. I'm not going down the DCOE route and can't get hold of a DGAS at the moment. Thanks - Paul
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Webcon UK Ltd Forum Index -> Calibration All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group. Hosted by phpBB.BizHat.com